(Job Editor)

1. Select the [Printer and Media] Tab.
2. Click [Change Profiles..] button.
3. Select the [Output] tab.
4. Click [Spot Channel Replacement] button.

 

(RIP-Queue)

1. 1. Highlight a printer and click “Configure Printer” icon on the toolbar. This opens “Configure Printer” dialog.

2. 2. In the [Quick Sets] tab, click [Edit] button. This opens “Edit Quick Set” dialog．

3. Click the [Change Profiles...] button. This opens the “ICC Profile Setup” dialog.
4. Click the [Output] tab, and then click the [Spot Channel Replacement] button. This opens the “Spot Channel Replacement” dialog (Figure 1).

1. Highlight the spot color you want to define, and click Edit button. This opens the "Edit Spot Channel Replacement" dialog (Figure 2).
2. In the [Spot Type] drop-down box, select the [Color Space] you are using.
3. In the [Color Data] section, enter the values for your spot color by either using the slider bars or typing the values into the respective fields. A sample of your spot color appears to the left.
4. Click [OK].

 

NOTE: If the [Auto-replace Spot Colors] checkbox in the PS/PDF Separations of the PS/PDF tree is left unchecked, the defined colors in the "Spot Channel Replacement" dialog is not referenced.

TIP: To learn more about printing with spot colors, the “Printing with Spot Colors” article.